viktor ^{(50 Posts)}

In the previous multicast post we configured the RP statically. If we have a lot of routers this solution is not going to be scalable…

We continue the previous multicast lab. This time we take a look at how RPF check works, how we can prevent RPF failures, and how…

These features allow us copy the traffic of a switchport or an entire VLAN and send the copied frames to another switchport. This destination port…

In the previous post about VPLS implementation we configured the remote PEs manually under the VFI, like this: This solution is not scalable if the…

We're going to configure Layer 2 services for customers over an MPLS cloud using SR OS routers. First we're going to take a look at…

I've been experimenting with different router images and I tried to establish the OSPF neighbor adjacency between a Cisco and an Alcatel (SR OS) router.