viktooor.com - Tech Blog from Hungary

Post for: #MPLS (15 Posts)

Implementing Unified MPLS

viktor
BGP Cisco MPLS Networking Redistribution

Because of scalability reasons we might have multiple IGP processes running within our core network. If we have many routers and prefixes we might have…

Read more →

Implementing MPLS-TE: VPN over the TE tunnel from PE to PE, TE metric, explicit-path

viktor
Cisco MPLS MPLS-TE Networking OSPF

By default the IGP metric (ISIS/OSPF cost) determines how the packets are forwarded within the MPLS core. With MPLS Traffic Engineering (TE) we can be…

Read more →

Ethernet Flow Point: VLAN tag manipulation for the VPLS service

viktor
Cisco L2VPN MPLS Networking VLAN

We continue one of my previous VPLS topology: this time we're going to take a look at what happens from the perspective of the service…

Read more →

Multicast over MPLS: mVPN Profile 1 and Profile 13

viktor
Cisco MPLS Multicast Networking

After going through how we can configure Profile 0, this time we're going to take a look at two other profiles which both require mLDP.

Read more →

Multicast over MPLS: mVPN Profile 0 (Draft Rosen)

viktor
Cisco MPLS Multicast Networking

Previously I wrote a few posts about how multicast works but only within an enterprise environment without MPLS. This time we're going to take a…

Read more →

Carrier Supporting Carrier (CSC) MPLS L3VPN

viktor
BGP Cisco CSC L3VPN MPLS Networking

After going through inter-AS Option A, B and C, this time we take a look at the CSC implementation. This is very similar to the…

Read more →
← Previous

© 2025 Powered by Publii | viktooor.com