Post for: #Multicast ^{(4 Posts)}

We extend our previous topology with a few new routers to demostrate how the PIM Assert mechanism work. This time we configure PIM with dense-mode…

In the previous multicast post we configured the RP statically. If we have a lot of routers this solution is not going to be scalable…

We continue the previous multicast lab. This time we take a look at how RPF check works, how we can prevent RPF failures, and how…

In this post I'm going to walk through how we can configure basic multicast routing using PIM Sparse-Mode. I'm going to walk though how the…